Arnold Air Force Base

Sort By

Category

Show Advanced Options

Clear Filters |

AEDC Test Technology, Analysis and Evaluation Branch validates, advances testing

Evan Milligan, a journeyman wireman, connects cables to a F404 engine Jan. 10, 2020, in a sea level test cell at Arnold Air Force Base, Tenn. The engine is being prepared for use as a testbed by the Arnold Engineering Development Complex Technology, Analysis and Evaluation Branch. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC Test Technology, Analysis and Evaluation Branch validates, advances testing

Evan Milligan, a journeyman wireman, connects cables to a F404 engine Jan. 10, 2020, in a sea level test cell at Arnold Air Force Base, Tenn. The engine is being prepared for use as a testbed by the Arnold Engineering Development Complex Technology, Analysis and Evaluation Branch. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC Test Technology, Analysis and Evaluation Branch validates, advances testing

Stan Freeze, outside machinist, inspects the tail of a F404 engine Jan. 10, 2020, in a sea level test cell at Arnold Air Force Base, Tenn. The engine is being prepared for use as a testbed by the Arnold Engineering Development Complex Technology, Analysis and Evaluation Branch. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC Test Technology, Analysis and Evaluation Branch validates, advances testing

Stan Freeze, an outside machinist, inspects the tail of a F404 engine Jan. 10, 2020, in a sea level test cell at Arnold Air Force Base, Tenn. The engine is being prepared for use as a testbed by the Arnold Engineering Development Complex Technology, Analysis and Evaluation Branch. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC Test Technology, Analysis and Evaluation Branch validates, advances testing

Stan Freeze, an outside machinist, removes a plug from a borescope inspection port on an F404 engine Jan. 10, 2020, in a sea level test cell at Arnold Air Force Base, Tenn. The engine is being prepared for use as a testbed by the Arnold Engineering Development Complex Technology, Analysis and Evaluation Branch. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC Test Technology, Analysis and Evaluation Branch validates, advances testing

Stan Freeze, an outside machinist, removes a plug from a borescope inspection port on an F404 engine Jan. 10, 2020, in a sea level test cell at Arnold Air Force Base, Tenn. The engine is being prepared for use as a testbed by the Arnold Engineering Development Complex Technology, Analysis and Evaluation Branch. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services conducts live fire training

Arnold Air Force Base Fire and Emergency Services personnel attack a fire using vehicle-mounted nozzles while training March 5, 2020, on aircraft rescue and firefighting techniques at a training area on base. (U.S. Air Force photo by Jill Pickett)

Details Download

200305-F-KN521-0265

While training, March 5, 2020, on aircraft rescue and firefighting techniques at a training area on base, Arnold Air Force Base Fire and Emergency Services personnel use aircraft fighting vehicle-mounted nozzles to battle a blaze. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services conducts live fire training

Arnold Air Force Base Fire and Emergency Services personnel use the roof turret on an aircraft firefighting vehicle to battle a blaze while training, March 5, 2020, on aircraft rescue and firefighting techniques at the fire crew’s training area on base. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services conducts live fire training

Arnold Air Force Base Fire and Emergency Services personnel attack a ground fire near an aircraft with a hand line while training, March 5, 2020, using a propane-fueled trainer brought to the base. The aircraft trainer uses propane to generate controlled fires in various locations in and around the mock fuselage. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services conducts live fire training

Arnold Air Force Base Fire and Emergency Services personnel attack an aircraft engine fire with a hand line while training, March 5, 2020, using a propane-fueled trainer brought to the base. The simulator, which was brought in to facilitate training, uses liquid and vapor propane to create controlled and repeatable fire scenarios. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services conducts live fire training

Arnold Air Force Base Fire and Emergency Services personnel attack an aircraft fire with a hand line as they train, March 5, 2020, on aircraft rescue and firefighting techniques using a propane-fueled trainer brought to the base. The aircraft trainer can simulate fires in multiple locations - cabin, ground, engine, wheel and brake, and the auxiliary power unit. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services conducts live fire training

Arnold Air Force Base Fire and Emergency Services personnel enter a live fire trainer Feb. 25, 2020, at Arnold AFB, Tenn. during a training exercise. The trainer is a mobile trailer brought to the base for training. It uses propane for the fuel and simulated smoke, providing a more controllable situation for training. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services conducts live fire training

A firefighter stands in a live fire training simulator at Arnold Air Force Base, Tenn., Feb. 25, 2020. Propane fuels the fires in the simulator. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services conducts live fire training

Charles Rafferty with the Kentucky State Fire Commission operates the live fire training simulator, Feb. 25, 2020, at Arnold Air Force Base, Tenn. Arnold AFB Fire and Emergency Services has worked with the Kentucky Community and Technical College System, which includes the Kentucky State Fire Commission, for the past several years for live fire training using the Commission's simulator. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC T-3 engine test cell receives upgrades for future tests

Dakota Aaron, right, an eSTARR hardware engineer, and Calvin Davis, an instrumentation, data and controls engineer, evaluate the system test plan book in front of new displays in the Arnold Engineering Development Complex Engine Test Facility T-3 test cell data conditioning room at Arnold Air Force Base, Tenn., Dec. 3. The displays are part of recent upgrades to the test cell. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC T-3 engine test cell receives upgrades for future tests

Dakota Aaron, left, an eSTARR hardware engineer, and Calvin Davis, an instrumentation, data and controls engineer, look at a portable data acquisition system in the Arnold Engineering Development Complex Engine Test Facility T-3 test cell data conditioning room at Arnold Air Force Base, Tenn., Dec. 3. The portable data acquisition system is part of an upgrade effort for the test cell, which includes the data source computers, left, and digital voltage scanners, center. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC T-3 engine test cell receives upgrades for future tests

Shown, Dec. 3, is an example of the new interconnect panels for voltage measurements and signal cabling that were installed as part of the upgrades to the Arnold Engineering Development Complex T-3 turbine engine test cell at Arnold Air Force Base. (U.S. Air Force photo by Jill Pickett)

Details Download

F135 returns to Arnold for testing in Sea Level facility

An F135 engine sits in an Arnold Engineering Development Complex (AEDC) Engine Test Facility test cell at Arnold Air Force Base, Tenn., between test runs. The F135 is undergoing Accelerated Mission Testing in the AEDC facility and is used to power the F-35 Joint Strike Fighter Lightning II. (U.S. Air Force photo by Jill Pickett)

Details Download

F135 returns to Arnold for testing in Sea Level facility

An F135 engine sits in an Arnold Engineering Development Complex (AEDC) Engine Test Facility test cell at Arnold Air Force Base, Tenn., between test runs. The F135 is undergoing Accelerated Mission Testing in the AEDC facility and is used to power the F-35 Joint Strike Fighter Lightning II. (U.S. Air Force photo by Jill Pickett)

Details Download