Arnold Air Force Base

Sort By

Category

Show Advanced Options

Clear Filters |

AEDC Aeropropulsion team takes the lead on AFWERX Rapid Test Technique Development effort

Darren Carroll, a test operations engineer, points to a monitor while directing test operations in the Sea Level 2 Test Cell, Dec. 17, 2020, at Arnold Air Force Base, Tenn. Also pictured, from right, machinist lead Alan Womack and test engineers Jillian Sears and Yancee Burchett. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC Aeropropulsion team takes the lead on AFWERX Rapid Test Technique Development effort

Arnold Engineering Development Complex test engineers, from left, Yancee Burchett, Jillian Sears and Capt. Brian Gatzke, monitor a nozzle test in the Sea Level 2 Test Cell, Dec. 17, 2020, at Arnold Air Force Base, Tenn. The test team was using small-scale models of nozzles to investigate their acoustic properties. (U.S. Air Force photo by Jill Pickett)

Details Download

Safety measures added along Wattendorf Memorial Highway

Billy Clemons adds a sticker to the end of a section of guardrail to improve visibility of the hardware as he and a crew install new guardrails along Wattendorf Memorial Highway at Arnold Air Force Base, Tenn., Jan. 27, 2021. Guardrails were added to areas where the shoulder drops off and at bridge ends to increase safety for motorists. (U.S. Air Force photo by Jill Pickett)

Details Download

Safety measures added along Wattendorf Memorial Highway

Ben Dees secures a section of guardrail while working on a crew installing new guardrails along Wattendorf Memorial Highway at Arnold Air Force Base, Tenn., Jan. 27, 2021. Guardrails were added to areas where the shoulder drops off and at bridge ends to increase safety for motorists. (U.S. Air Force photo by Jill Pickett)

Details Download

Senior Master Sgt. Jason Harlan

Senior Master Sgt. Jason Harlan

Details Download

Arnold Fire and Emergency Services’ new ambulance will benefit the department, base and community

Joey Anderson, a firefighter/paramedic for Arnold Air Force Base Fire and Emergency Services, demonstrates the powered oxygen tank lift on the newly-acquired ambulance Jan. 12, 2021, Arnold AFB, Tenn. The tank is more accessible than on the previous style of ambulance, and the lift increases safety for firefighters. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold Fire and Emergency Services’ new ambulance will benefit the department, base and community

Joey Anderson, a firefighter/paramedic for Arnold Air Force Base Fire and Emergency Services, checks supplies in the FES team’s newly-acquired ambulance Jan. 12, 2021, Arnold AFB, Tenn. The cabinets inside the ambulance can be accessed by both sliding doors and swinging doors. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold Fire and Emergency Services’ new ambulance will benefit the department, base and community

Joey Anderson, a firefighter/paramedic for Arnold Air Force Base Fire and Emergency Services, demonstrates the cot with power-assisted loading system on the newly-acquired ambulance Jan. 12, 2021, Arnold AFB, Tenn. The loading system enhances patient safety and helps prevent back injuries to firefighters. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

A test cart with an AGARD-B model installed is moved into the 16-foot supersonic wind tunnel, Jan. 12, 2021, at Arnold Air Force Base, Tenn. AGARD-B is a standard model used in wind tunnels to generate data that can be compared across wind tunnels. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

A test cart with an AGARD-B model installed is moved into the 16-foot supersonic wind tunnel, Jan. 12, 2021, at Arnold Air Force Base, Tenn. The test run with the AGARD-B model is the culmination of years of work to return Tunnel 16S to service. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

An AGARD-B model is seen here mounted on a sting in the 16-foot supersonic wind tunnel at Arnold Air Force Base, Tenn., Jan. 18, 2021. A test run with the AGARD-B model was the culmination of a multi-year effort to return Tunnel 16S to service. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

An AGARD-B model is seen here mounted on a sting in the 16-foot supersonic wind tunnel at Arnold Air Force Base, Tenn., Jan. 18, 2021. A test run with the AGARD-B model was the culmination of a multi-year effort to return Tunnel 16S to service. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

Bradley Rogers, lead outside machinist, removes a hatch to access the interior of an AGARD-B model in the 16-foot supersonic wind tunnel at Arnold Air Force Base, Tenn., Jan. 18, 2021. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

Arnold Engineering Development Complex team members watch as a test cart is moved off a transfer cart and into the high bay of the 16-foot supersonic wind tunnel, Jan. 12, 2021, at Arnold Air Force Base, Tenn. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

Trey Glenn, an outside machinist, rotates a wheel truck on a transfer cart carrying a test cart from the Model Installation Building to the 16-foot supersonic wind tunnel, Jan. 12, 2021, at Arnold Air Force Base, Tenn. The transfer cart rides on rails, and in order to make a turn the cart is jacked up, then the wheel trucks are rotated 90 degrees. (U.S. Air Force photo by Jill Pickett) (This image has been altered by obscuring a badge for security purposes.)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

Ductwork of the Propulsion Wind Tunnel Facility is seen in the background as a test cart with an AGARD-B model installed moves from the Model Installation Building to the 16-foot supersonic wind tunnel, Jan. 12, 2021, at Arnold Air Force Base, Tenn. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

ale McKill, an outside machinist, makes incremental adjustments to an AGARD-B model to ensure the surface is as smooth as possible where access covers are located, Jan. 8, 2021, at Arnold Air Force Base, Tenn. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

Darrell Gagnon, an outside machinist, secures instrumentation inside the body of an AGARD-B model while preparing to install the model on a sting, Jan. 4, 2021, at Arnold Air Force Base, Tenn. (U.S. Air Force photo by Jill Pickett)

Details Download

AEDC 16-foot supersonic wind tunnel restored to operational status

Chris Lawton, from left, outside machinist, Darrell Gagnon, outside machinist, and Bradley Rogers, lead outside machinist, reposition checkload equipment on a balance calibration body as part of the preparations to install a model on the sting, Jan. 4, 2021, at Arnold Air Force Base, Tenn. (U.S. Air Force photo by Jill Pickett) (This image was altered by obscuring a badge for security purposes.)

Details Download

Heavy Equipment crew at Arnold AFB helps keep roadways safe if winter weather strikes

Arnold Engineering Development Complex Heavy Equipment crew members Tony Buchanan, left, and Blake Braden, both laborers, prepare for possible winter weather by making a brine solution to be used on roadways, Jan. 6, 2021, at Arnold Air Force Base, Tenn. (U.S. Air Force photo by Jill Pickett)

Details Download