Arnold Air Force Base

Sort By

Category

Show Advanced Options

Clear Filters |

Arnold AFB Fire and Emergency Services hones skills with live fire training

Col. Chris Lance, left, chief of the Test Support Division, Arnold Engineering Development Complex (AEDC), listens as Jason Armstrong, center, a driver/operator with the Arnold Air Force Base Fire and Emergency Services (FES), and Anthony Jimcoily, a firefighter/crew chief, explain how to use the bumper turret on the truck to spray water, March 3, 2022, at the base. Lance and Chief Master Sgt. Jennifer Cirricione, not pictured, senior enlisted leader for AEDC, were learning about aircraft rescue and firefighting training. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services hones skills with live fire training

Arnold Air Force Base Fire and Emergency Services personnel operate a bumper turret spraying water as they train March 3, 2022, on aircraft rescue and firefighting techniques at the base. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services hones skills with live fire training

Arnold Air Force Base firefighters battle a fire in a live fire trainer, Feb. 23, 2022, at Arnold AFB, Tenn. The trainer uses propane to fuel fires to simulate a structure fire. The door, shown open here, is usually closed creating the dark environment of a fire, but was open to facilitate photography. (U.S. Air Force photo by Jill Pickett)

Details Download

Arnold AFB Fire and Emergency Services hones skills with live fire training

Arnold Air Force Base firefighters enter a trailer designed to simulate a structure fire, Feb. 23, 2022, at Arnold AFB, Tenn. In the trailer, fires are fueled by propane, providing a more controllable situation for training. (U.S. Air Force photo by Jill Pickett)

Details Download

New device leads to cost, time savings for von Kármán Facility maintenance

A device, shown here, developed by Arnold Engineering Development Complex employees to surface motor brushes prior to installing them at Arnold Air Force Base, Tenn., Feb. 24, 2022. (U.S. Air Force photos by Jill Pickett)

Details Download

New device leads to cost, time savings for von Kármán Facility maintenance

A device, shown here, developed by Arnold Engineering Development Complex employees to surface motor brushes prior to installing them at Arnold Air Force Base, Tenn., Feb. 24, 2022. (U.S. Air Force photos by Jill Pickett)

Details Download

New device leads to cost, time savings for von Kármán Facility maintenance

A device, shown here, developed by Arnold Engineering Development Complex employees to surface motor brushes prior to installing them at Arnold Air Force Base, Tenn., Feb. 24, 2022. (U.S. Air Force photo by Jill Pickett)

Details Download

New device leads to cost, time savings for von Kármán Facility maintenance

A device, shown here, developed by Arnold Engineering Development Complex employees to surface motor brushes prior to installing them at Arnold Air Force Base, Tenn., Feb. 24, 2022. (U.S. Air Force photos by Jill Pickett)

Details Download

New device leads to cost, time savings for von Kármán Facility maintenance

From left, Gary Jarrell, an operations engineer; Bruce Jones, an engineer tech specialist; Joel Sizemore, an aerospace machinist; and Carlos Bussche, an electrician, stand behind the device they designed and built to surface motor brushes prior to installing them at Arnold Air Force Base, Tenn., Feb. 24, 2022. Not pictured is Eddie Lee. (U.S. Air Force photo by Jill Pickett)

Details Download

New device leads to cost, time savings for von Kármán Facility maintenance

An Arnold Engineering Development Complex employee places a motor brush into a device developed to surface motor brushes prior to installing them in a motor at Arnold Air Force Base, Tenn., Feb. 24, 2022. Surfacing the brushes prior to installation has resulted in time savings. (U.S. Air Force photo by Jill Pickett)

Details Download

Melissa Tate becomes first female McKinley Climatic Laboratory site director

Melissa Tate, lead engineer and deputy of the Propulsion Test Branch, Test Division, Arnold Engineering Development Complex, stands outside the Engine Test Facility at Arnold Air Force Base, Tenn, March 1, 2022. (U.S. Air Force photo by Deidre Moon)

Details Download

Breaux promoted to lieutenant colonel

From left, Lt. Col. Lane Haubelt, chief, Propulsion Test Branch, Test Division, Arnold Engineering Development Complex, administers the oath of office to newly-promoted Lt. Col. Bradley Breaux during a ceremony Feb. 25, 2022, at Arnold Air Force Base, Tenn. (U.S. Air Force photo by Jill Pickett)

Details Download

190620-F-KN521-0008

Col. Jeffrey Geraghty

Details Download

Spring prescribed fire season is approaching at Arnold AFB

Pictured is a prescribed fire, or controlled burn, at Arnold Air Force Base. Prescribed fire is the most efficient and economical tool when managing natural ecosystems, allowing land managers to alter and improve the native ecosystems without utilizing more costly methods such as bush hogging, under brushing, and herbicide applications. (Courtesy photo)

Details Download

Spring prescribed fire season is approaching at Arnold AFB

Pictured is a prescribed fire, or controlled burn, at Arnold Air Force Base. Prescribed fire is the most efficient and economical tool when managing natural ecosystems, allowing land managers to alter and improve the native ecosystems without utilizing more costly methods such as bush hogging, under brushing, and herbicide applications. (Courtesy photo)

Details Download

Using standard models provides beneficial data prior to customer tests in AEDC wind tunnels

A test cart with an AGARD model in the "B" configuration is moved on a transfer cart from the Model Installation Building to the 16-foot transonic wind tunnel at Arnold Air Force Base, Tenn., Nov. 2, 2021. (U.S. Air Force photos by Jill Pickett)

Details Download

Using standard models provides beneficial data prior to customer tests in AEDC wind tunnels

The AGARD-C model is installed in the 16-foot transonic wind tunnel at Arnold Air Force Base, Tenn. to assess the quality of the airflow through the tunnel, Nov. 17, 2021. The model is a standard model that can be used to compare and contrast data collected during different timeframes or from different tunnels to ensure the data taken during testing is reliable. (U.S. Air Force photo by Jill Pickett)

Details Download

Using standard models provides beneficial data prior to customer tests in AEDC wind tunnels

Adam Gilliland, an aerospace machinist, works on a standard test model in the area below the test cell of Tunnel C in the von Kármán Gas Dynamics Facility at Arnold Air Force Base, Tenn., Dec. 7, 2021. When testing, the model is raised into the test section with the tunnel in operation. (U.S. Air Force photos by Jill Pickett)

Details Download

Using standard models provides beneficial data prior to customer tests in AEDC wind tunnels

A standard test model cone is seen through portholes in Tunnel C of the von Kármán Gas Dynamics Facility at Arnold Air Force Base, Tenn., Dec. 7, 2021. Standard model designs are generic shapes that can be tested in the wind tunnels to obtain data and assess flow quality. (U.S. Air Force photos by Jill Pickett)

Details Download

Using standard models provides beneficial data prior to customer tests in AEDC wind tunnels

Ben Howell, a test operations engineer, sprays pressure sensitive paint onto an AGARD-C model installed in the 16-foot transonic wind tunnel at Arnold Air Force Base, Tenn., Dec. 3, 2021. (U.S. Air Force photos by Jill Pickett)

Details Download